Etichetta Filtro Edenya Ag Small
Retro Etichetta Filtro Edenya Inglese
Retro Etichetta Filtro Edenya
Dettaglio Dell'attacco Del Filtro Edenya

Edenya activated carbon AG 0.5 microns Small

List price: 37,50 IVA inc.

Edenya filter with silvered activated carbon, ideal for eliminating chlorine, unwanted odors and flavors and sedimentation up to 0.5 microns. Silver salts provide a bacteriostatic function preventing bacterial growth. The filter is compatible with the Everpure AC2 filter. Universal connection compatible with all heads on the market.

SKU: EDN1-S

30 in stock

Edenya is an activated carbon filter that eliminates chlorine taste and smell. It acts with a 2-stage filtration:

mechanical filtration by a membrane made of polyethylene fibers, large surface with filtration degree to 0.5 microns, with special drainage. This ensures the retention of impurities and suspended substances,

– a chemical adsorption action carried out by the activated carbon in powder form from the coconut, which eliminates the taste and smell of chlorine in the water.

 

Filters with bayonet mount/ rapid system in combination with a special head.

The filter mount is compatible with most commercially available heads.

 

When to use the Edenya activated carbon filter AG Small

  • in the kitchen (under sink)
  • at drinking water sampling points;
  • as the last stage of filtration in multiple filtration systems;

Technical characteristics

  • Filter height: 260 mm
  • Diameter: 79 mm
  • Flow: 200 lt/h**
  • Range*: 10000 lt***

* For the calculation of the autonomies the presence of 1 ppm of chlorine in the water to be treated is considered.

** Flow may vary depending on inlet pressure.

***Internal laboratory determination using Hanna Instruments photometer.

 

Filter installation

Headboard support

Come installare un filtro sotto lavello

1. Loosen the centre screw (A),
2. unscrew and remove the two side screws (B),
3. position the fixing bracket (C),

4. screw and tighten the two screws (B),
5. tighten the screw (A) thoroughly,
NOTE – The support bracket (C) of the filter head is predisposed for fixing to the wall, through the slotted holes (D).

Verify that the area assumed for the placement of the filter is compatible with the rational “turn” of the pipes and their length.
Also check that the presence of the filter and its connections, does not hinder in any way other normal functions, during the exercise of activity.
When fixing the tested unit to the wall, the mounted filter must be at a distance from the ground of at least 10 cm, to allow its replacement. For fixing the bracket, use expansion plugs (in the case of fixing on masonry part), self-tapping screws (in the case of fixing on sheet), wooden screws (in the case of fixing on wooden walls).

Do not use adhesives or adhesive tapes.

Additional information

Weight 1 kg
Filter height
External diameter
Capacity
Flusso acqua

200 lt/h

Tempi per la spedizione
Still no Reviews for this Product