Ionicore Big Pleated polyester cartridges 20″ – 5 micron suitable for water treatment systems
The cartridges are made with a special formula of cellulose, resins and polyester fibers, which guarantee long duration and great performances.
The use of these materials, ensure great water resistance, better than the one given by the normal cellulose cartridges; for the same reason, this product is able to work with high water volumes and it has an incredible sediments holding capacity with almost no pressure lost.
Thanks to the high filtering capacity, the cartridge can be used in multiple fields relating to water treatment and filtering.
The pleated body hides a polypropylene core and thanks to its extremities dipped into the thermosetting plastisol vinyl, the cartridge is characterized by just one locking, which increases its resistance considerably.
In order to ensure a better filtering efficiency, the top junction has been welded so to reduce the possibility of any kind of internal exclusion to guarantee the best performances.
Thanks to their resistance to the chemical products, these cartridges are suitable for many applications: from the residential to the commercial and industrial field.
Service life capacity varies according to, inlet water quality, required flow rate, inlet water pressure, filter use (continuous or intermittent, stopped for a certain period).
Technical data
- Service life: When completely dirt – 3, Max. 6 months
- Initial psi @ Flow Rate (gpm) PL: <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
- Filter Media: Cellulose Polyester
- End Caps: PVC
- Core: Polypropylene
- Pressure: 8,6bar (125psi) max.
- Temperature Rating: 50 – 113°F (10 – 45°C)
- Dimensions H.xO.D.: 20″ x 4-1/2″ (Inch) / 508 x 114 (mm.)
- I.D. Core: 1,102″ (Inch) / 28 (mm.)
