The PureWater New Display reverse osmosis system is a device designed for water purification.
The unit is equipped with a silver-impregnated activated carbon filter as a pre-filtration stage and a high-performance vane pump with a flow rate of 300 L/h. Thanks to a pressure of 8-10 bar, it allows the production of approximately 110 L/h of purified water.
PureWater New Display features two 2012 reverse osmosis membranes, manufactured in Italy, with a 200 GPD capacity and TFC technology. These membranes work in synergy to effectively remove impurities and contaminants from the water.
To ensure optimal performance, the PureWater New Display system is equipped with a 12″ x 2.5″ NSF-certified silver-impregnated activated carbon pre-filter.
The system produces up to 110 liters of purified water per hour, ensuring a constant flow of clean water. It operates at a pressure of 8-10 bar and requires an inlet water pressure between 2 and 5 bar.
With its compact dimensions (H. 10.5 cm x W. 49 cm x D. 40 cm) and a weight of only 14 kg, the PureWater New Display is incredibly versatile and easily adapts to any home or professional environment.
This reverse osmosis system can be installed either vertically under the kitchen sink or horizontally in the kitchen plinth.
Intuitive display for machine management.
The Pure Water New Display system is equipped with a digital display that assists the user in managing the unit.
Thanks to the display, the following operations can be performed:
- System anomaly detection
- Filter replacement alert
- Water meter reset
- System reset
Technical Specifications of the Pure Water New Display System
- Power Supply: 220V 50Hz
- Power Consumption: 200W (operating motor: 180W, 220V 50Hz)
- Vane Pump: Rotary, 300 L/h
- Reverse Osmosis Membranes: 2 x 2012, 200 GPD each
- Bacteriostatic GAC Filter: 1 x 11” x 2.5”, NSF-certified
- Sediment pre-filter: 1 DA 12″x 2.5″
- Purified Water Production: 110 L/h (+/- 20%)
- Operating Pressure: 8-10 bar
- Inlet Water Pressure: Min 2 – Max 5 bar
- Rejection Rate: 90-95%
- Wastewater to Purified Water Ratio: 2:1
- Maximum Total Dissolved Solids (TDS) in Inlet Water: 2000 mg/L
- Allowed pH Range for Inlet Water: Min 3 – Max 11
- Dimensions: H. 10.5 x W. 49 x D. 40 cm
- Weight: 14 kg
Single-way faucet included.
Single-way chrome faucet with 1/4″ connection, suitable for under-sink water filtration systems such as reverse osmosis and microfiltration.
Installation kit with fittings and hoses.
Each Edenya reverse osmosis system is equipped with an installation kit, consisting of fittings and valves necessary for the proper functioning of the system.
The kit includes:
- 2 meters of 10mm tubing
- 2 meters of 6mm tubing
- 1 drainage clamp
- 1 Tee 3/8″
- 2 elbow fittings 10mm x 10mm
- 3 elbow fittings 6mm x 6mm
- 1 mini-ball valve 3/8″
- 1 female nut 3/4″ x 1/4″
- 1 threaded connector 3/8″ x 10mm
- 1 threaded connector 1/4″ x 10mm
