What is the tds?
This professional TDS is a 5-in-1 tool for measuring water quality. The types of measurement it can perform are: PH, TDS, EC, ORP and temperature.
Multi-purpose tester
Testers can be taken anywhere to measure water quality in general including mains water, osmosis water, sea water, swimming pools or an aquarium.
On and off function
The TDS turns itself off if not used and does so automatically after 5 minutes so that the battery lasts longer over time.
The large LCD screen backlit by green light offers the easy possibility of reading the values in any situation.
High sensitivity
The Testers are made from very robust components and material, this quality allows you
The testers are assembled with high quality electronic components to ensure the best accuracy, and with a replaceable sensor probe.
Automatic temperature compensation
To overcome the problems of inaccuracy caused by the variation of the liquid temperature, the tester is able to accurately measure the pH of the liquid at a temperature between 0-60 ° C (32-140 ° F).
Automatic calibration
Calibration based on 3 values with automatic temperature adjustment.
Immerse the electrode in a PH calibration solution (6.86, 4.00 and 9.18) and press the CAL button to perform the automatic calibration.
Specifications
– Conductivity measurement range: from 0 to 10000uS / cm; 10.01-19.99 ms; 20.1-400 ms / cm. Measurement accuracy of ± 2%
– TDS measurement range: from 0 to 1000ppm; from 1000 ppm to 10000 ppm; 10.1 to 200.0 PPT. Measurement accuracy of ± 2%
– Measurement range of the ORP: ± 1000mv. Resolution: 1mv. Accuracy: ± 2mv
– PH measurement range: 0.01-14.00pH. Accuracy: ± 0.05pH
– Temperature measurement range: 0.1-60.0 / 32.0-140. Accuracy: ± 0.5
– Automatic shutdown: 5 minutes
– Power supply: 3×1.5LR44
– Display size: 33x24mm
– Dimensions: 183x37x37mm
– Degree of waterproofing: IP67
– Power Consumption: 2.9mA
product code 13000601
