This filters are ideal for:
– drinking and cooking in maximum safety
– improve taste of beverages, sparkling water and post-mix systems
– protect from clogging, corrosion and wear
– vertical installation
– installation without electrical connections
This rapid filter is easy to install and replace without use of special tools and it reduces:
– chlorine
– cysts,
– particulate in suspension
Features
• Technology: Precoat, activated carbon
• Micron rating: 0,5 micron
• Capacity: 3.785 L. (1.000 gallons)
• Working pressure: 10 – 125 psi (0.7 – 8.6 bar), non-shock.
• Temperature: 35 – 100°F (2 – 38°C)
• Servie flow rate: 0,5 gpm (1,9 Lpm)
• cartridge dimensions HxD (mm): H54 254×82,5(mm.) – 10”x3.25″(In.)
(leave a vertical space about 7 cm under filter to allow replacement)
• activation: it is advisable to run water through filter at maximum pressure and full flow rate for at least 5 minutes to allow
air purging and flushing of cartridge.
• cartridge change: when capacity is reached or when flow comes too slow (precipitates under 0,7 bar-10 psi), every 6
months but at least annually.
N.B. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
