PROFINE® BLUE Large reduces turbidity, chlorine content, off-tastes and odours. It has a filter rating of 5 microns. It is a quick-connect cartridge produced with extruded carbon block filtration in compliance with EU Directive 98/83/EC. For use in process systems and/or household appliances. If the cartridge is used in equipment to treat water intended for human consumption, the equipment must meet the drinking water standards.
Technical specifications
– Operating flow rate: 7 lt/min
– Working pressure: Min. 29 – Max. 87 Psi
– Temperature: Min. 4 Max. 30°C (39-86°F)
– Capacity: 45.000 lt
– Dimensions (mm): 529 x87,4
– Installation: upright or horizontal
Warning
Flow rate and capacity can vary, even to a considerable extent, depending on the quality of the incoming water. Use in accordance with the directions.
Dispose of the spent cartridge responsability
Dispose the exhausted cartridge in compliance with Decision 2000/532/CE (code 15 02 03 EWC).
Cartridge replacement instructions
1
Close the water inlet valve and open the outlet valve.
2
Turn the cartridge a ¼ turn to the left and pull it out.
3
Remove the cap seal and moisten the O-rings with water. Push the cartridge up and turn it a ¼ turn to the right.
4
Open the water inlet valve and allow the water to run for 5 minutes before takingany.
