Profine Nitrates Large is a disposable cartridge with nitrate selective resin for the treatment of drinking water. The Profine filter with bayonet mount reduces nitrate. This filter is built with the strong anionic macroporous resin and has a stage of final filtration with 0.5 micron nominal and carbon block with silver. Used at point of use, for drinking water with concentration of nitrate of > 50 mg/l
The advantages:
- Eliminates unwanted odors and tastes and reduces chlorine
- Provides bacteriostatic action
- Addatte nitrate concentration
Technical specifications
– Functional flow rate: 2,2 lt/min
– Capacity: 2100 lt
– Working pressure: Min. 29 – Max. 87 Psi
– Temperature: Min. 4 Max. 30°C (39-86°F)
– Dimensions (mm): 529 x 87,4
– Installation: upright. R head is required.
Warning
The functional flow rate depending on the quality of the incoming water flow rates can vary considerably. Use in accordance with the directions.
Dispose the exhausted cartridge in compliance with Decision 2000/532/CE (code 15 02 03 EWC).
Cartridge replacement instructions
1
Close the water inlet valve and open the outlet valve.
2
Turn the cartridge a ¼ turn to the left and pull it out.
3
Remove the cap seal and moisten the O-rings with water. Push the cartridge up and turn it a ¼ turn to the right.
4
Open the water inlet valve and allow the water to run for 5 minutes before taking an
