Profine Ocra Medium is quick-connect cartridge with strong gel cation softening resin. Filter for softening drinking water, with fixed residual hardness mixing, for beverage dispensers or similar equipment.
If the cartridge is used in food application equipment, the whole system must comply the EU regulation 178/2002.
Reduces the temporary hardness of water and removes completely scales due to limestone deposits.
– Improves taste of beverages, sparkling water and post-mix systems.
– Protects your implants and removes completely scales due to limestone deposits.
– No electrical connection required.
– Vertical installation.
– The filter is easy to install and to replaces without using any special tool.
The advantages:
- Eliminates unwanted odours
and tastes and reduces chlorine - Guarantees bacteriostatic action
- Reduces total hardness
- Protects installations
- It is effective against limescale
Technical data:
– Function flow rate: 2 lt/min
– Worging pressure (Psi): Min 29 – Max 87
– Temperature: Min. 4°C – Max 30°C (39°F-86°F)
– Dimensions (mm): 384×87,4
– Performance with 10°dH: 1100 lt
– Installation: upright.
Warning
Flow rates can vary, even to a considerable extent, depending on the quality of the incoming water
Use in accordance with the directions.
Cartridge replacement instructions
1
Close the water inlet valve and open the outlet valve.
2
Turn the cartridge a ¼ turn to the left and pull it out.
3
Remove the cap seal and moisten the O-rings with water. Push the cartridge up and turn it a ¼ turn to the right.
4
Open the water inlet valve and allow the water to run for 5 minutes before taking any
