Profine Violet filter Large is designed to reduce the temporary hardness of drinking water. Quick-connect cartridge with carboxylic weak cation resin mixed with granular carbon, featuring final Carbon Block stage with silver ions. If the cartridge is used in food processing equipment, the whole system must comply the EU regulation 178/2002.
Features:
– Temporary reduction of water hardness
– Removes completely scales due to limestone deposits
– Technology: carboxylic weak cation resin mixed with granular carbon, featuring final carbon block stage with silver ions
– Micron rating: 0,5 micron
– Installation: vertical
Hardness °dH-°F / Capacity lt.(bypass%):
– 6°dH-10°F / 2.664lt.(0%) – 2.960lt.(10%) – 4.440lt.(40%)
– 8°dH-15°F / 1.776lt.(0%) – 1.973lt.(10%) – 2.960lt.(40%)
– 11°dH-20°F / 1.332lt.(0%) – 1.480lt.(10%) – 2.220lt.(40%)
– 14°dH-25°F / 1.066lt.(0%) – 1.184lt.(10%) – 1.176lt.(40%)
– 17°dH-30°F / 888lt.(0%) – 987lt.(10%) – 1.480lt.(40%)
– 20°dH-35°F / 761lt.(0%) – 846lt.(10%) – 1.269lt.(40%)
– 22°dH-40°F / 666lt.(0%) – 740lt.(10%) – 1.110lt.(40%)
Technical specifications:
– Function Flow rate: 2,5 lt/min
– Working pressure: Min. 29 PSI – Max 87 PSI
– Temperature: Min 4°C – Max 30°C (39°F – 86°F)
Theorical capacity according to nominal ion-exchange resin capacity (Hardness 10°dH): 700 lt
– Dimensions:HxD (mm.) 529×87,4
– Installation: upright
Warning
Flow rates can vary, even to a considerable extent, depending on the quality of the incoming water. Use it in accordance with the directions.
Cartridge replacement instructions
1
Close the water inlet valve and open the outlet valve.
2
Turn the cartridge a ¼ turn to the left and pull it out.
3
Remove the cap seal and moisten the O-rings with water. Push the cartridge up and turn it a ¼ turn to the right.
4
Open the water inlet valve and allow the water to run for 5 minutes before taking any.
