Profine Yellow Medium ion-exchange resin filter (using cation and anion resins) designed for the total demineralization of water. It features a quick-connect cartridge with a mixed-bed demineralizing resin.
Warning: not for drinking water use
The advantages:
- Total demineralisation
- Use in technological and industrial installations
Technical specifications
– Functional flow rate: 1,5 lt/min
– Working pressure: Min 29 Psi – Max 87 Psi
– Temperature: Min 4°C – Max 30°C (39°F – 86°F)
– Installation: upright
– Head: R
– Dimensions (mm): 87,4 x 384
– Capacity: from 88 to 400 litri. It depending from the quality water
Warning
Use it in accordance with the directions.
The flow rate depending on the quality of the incoming water flow rates can vary considerably
Dispose of the spent cartridge responsability
Dispose the exhausted cartridge in compliance with Decision 2000/532/CE (code 15 02 03 EWC).
Cartridge replacement instructions
1
Close the water inlet valve and open the outlet valve.
2
Turn the cartridge a ¼ turn to the left and pull it out.
3
Remove the cap seal and moisten the O-rings with water. Push the cartridge up and turn it a ¼ turn to the right.
4
Open the water inlet valve and allow the water to run for 5 minutes before taking any.