4.5 liter water softener with manual regeneration for shower, regenerating single phase.
Technical characteristics:
– No electricity required.
– Easy installation.
– One step only to complete the whole regeneration process.
– Sliding cover for waterproofing.
– Maximum operating water temperature: 60 ºC.
Dimensions:
What you should buy with the water softener.
If you are interested in buying a water softener for your home, you might want to add these useful products to improve performance and ensure a longer life.
Titrant Kit
The titrant kit is a quick tester for measuring water hardness. It’s a very useful tool to know what is the hardness of water before the water softener and after the water softener. The tester can be useful for adjusting the hardness coming out of the softener and for monitoring the correct functioning of your appliance.
Producer of automatic chlorine
The chlorine producer is a system that allows an automatic sanitization to every regeneration. Thanks to an electrode, the system is able to act directly on the brine (Na+CL-) releasing chlorine that will sanitize the resins. It’s a very useful tool to give the softener more autonomy.
Sanitizing agent for resins
The resin sanitizer is an excellent alternative to the automatic chlorine manufacturer. In this case, the sanitization is done by inserting the granular sanitizer into the brine well. The ratio to follow is 1 g. per lt of resin of your water softener. Once added, during the regeneration phase the sanitizer will act on the resins purifying them and improving their softening properties.
Transparent container 10 in/out 1
The transparent container is a filter holder to be installed before the water softener. This system is used to protect the softener from any sediment that could affect the proper functioning of your plant. Once installed you’ll be able to protect the softener and ensure it a healthier and quieter life.
Filter wire wrapped from 10 – 50 microns
What is a container without its filter? The 50 micron cartridge is installed inside the vessel container to retain impurities, sediment, sand and other suspended material. It’s a system that can help the softener in his work by improving its performance. Once saturated, the filter must be replaced, on average every 3/4 months depending on the quality of the incoming water.
