This is a water softener elegant design that gives you the feeling of luxury water. Reduces the unpleasant limestone around the tub and the sink. It will save you money on your heating bill and reduce the consumption of all detergents and cleaning products. The water pipes will always be clean and free from fouling, clogging and damage. In all the water circuit there will be more pressure losses or water flows minors.
Efficient and carbon neutral
The Peanut 368 water softener has been shown to save up to 24% of the cost of running the heating system. The new Peanut 368 water softener has been specifically designed to look good. Consisting of a sleek compact shell which encases all working parts and looks great, but most importantly keeps everything clean and tidy. The Peanut 368 is one of the very few softeners available that can be defined as carbon neutral (defined by the Energy Saving Trust). Saving 50% on soap and detergent and prolonging the life of clothes by up to 15%.
Features
– Dimensions in cm (HxWxD) 50,7×28,2×44
– Liter resin: 14
– Resin: Heterospherical o Monospherical.
– Power: 230V-50Hz / 12V (power supply) European Plug
– Pressure min: 1,8bar(1,8kg/cm2)
– Pressure Max: 8bar(8kg/cm2)
– Nominal flow: 0,8m3/h
– Max flow: 1,1m3/h
– Reserve: reserve fixed with immediate or delayed regeneration (settable)
– Number of regeneration cycles: 5
– Type regeneration: downflow
– Tank: 10″x16″
– Temperature Min: 2°C
– Temperature Min: 35°C
– Environment temperature max: 45°C
– Average number of days between regenerations: 4 days(2) max 30 days.
– Power consuption: Typically 1 watt
Installation data
– Input / Output water 3/4″ male thread
– Drain: Male tube to hose elbow OD stem 1/2″
– Brine: 3/8 “compression
– Noryl By-pass icluded
Technical data
– Exchange capacity: 72,80ºHFxm3.
– Salt consumption for regeneration: 1,89 Kg./Salt.
– Water consumption in regeneration: 100lt.
– Quantity of water treated for regeneration, 30°F-2,43m3, 35°F-2,08m3, 40°F-1,82m3, 45°F-1,62m3, 50°F-1,45m3, 60°F-1,22m3.
Included with the water softener
– 3-pieces standard housing 10″ clear IN-OUT 3/4″ with wrench & wall mounting bracket
– Green filter wound polypropylene cartridge 9-3/4” – 20 micron
– Kit Total Hardness (1°F) single reagent 15cc.
– 1 Chlorine maker
