Water softener with FLECK 5600 SXT Electronic valve Automatic meter/time regeneration. The valve has a program with high performance which allows a low water and salt per regeneration consumption. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast:
– just enter time,
– enter day of week,
– enter time of regeneration, typically 02.00 at night,
– enter number of days between regenerations,
– enter hardness input.
– Complete with plug adapter 12/230V – 50Hz European plug.
– Hardness regulator output.
Is raccomended a minimum hardness in output of around 15 °f , but most commonly used setting is not less than 5 °f. Loosening setting screw will allow clapper by-pass to close. The closing action will reduce mixing with raw water output. To mix a specific output hardness value, adjust screw and test water. Repeat procedure until you reach desired hardness value.
Fleck valve 5600 SXT
– Simple and intuitive programming
– Large LCD display with blue backlight
– 48 hours of internal power backup
– Real time of day in hours and minutes
– Residual volume of softened water
– Display of cycle regeneration phases and remaining time
– Service and self-diagnosis indicators
– Fast and easy capacity, time and day of regeneration configuration
– Advanced programming options, including ability to program up to 6 cycles of regeneration with independent adjustment of time
– The program setting will not be lost in case of power outages remaining in memory
– Electronic regeneration step-by-step
– Manually, delayed or immediate regeneration
Benefits and advantages
Reduction of water hardness, which is cause of scale. ENERGY SAVING: the device prevents formation of deposits in pipes and hydraulic lines. Greater sense of wellness during shower. Skin soft and clean. Increased duration of appliances and boilers. COST SAVING: reduction in use of soaps, fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding salt in water softner.
Specifications
– Min. pressure: 1.4 bar (1.4 kg/cm2)
– Max. pressure: 8.5 bar (8.5 kg/cm2)
– Min. temperature: 2 ° C
– Max. temperature: 43 ° C
– Input/Output water 1″ female thread
– Exhaust: hose connector with 2m. of tube
– Overflow: hose connection 3/8″
8lt. resin (for 1/2 people)
– Exchange capacity: 38.56 º HFxm3.
– Salt consumption for regeneration: 0.88 Kg./Salt.
– Water consumption for regeneration: 47,2lt.
– Quantity of treated water for regeneration, 30°F-1,28m3, 35°F-1,10m3, 40°F-0,96m3, 45°F-0,85m3, 50°F-0,77m3, 60°F-0,64M3.
– Max. flow: 0.36 m3/h
– Dimensions Europe I – Base (mm): 480×320 * Height (mm): 655
10lt. resin (for 1/2 people)
– Exchange capacity: 48,20ºHFxm3.
– Salt consumption for regeneration: 1,10 Kg./salt.
– Water consumption for regeneration: 63,8lt.
– Quantity of treated water for regeneration, 30°F-1,6m3, 35°F-1,38m3, 40°F-1,21m3, 45°F-1,07m3, 50°F-0,97m3, 60°F-0,80m3.
– Max. flow: 0,45m3/h
– Dimensions Europe I – Base (mm): 480×320 * Height (mm): 655
12lt. resin (for 2/3 people)
– Exchange capacity: 57,84ºHFxm3.
– Salt consumption for regeneration: 1,32 Kg./salt.
– Water consumption for regeneration: 70,8lt.
– Quantity of treated water for regeneration, 30°F-1,93m3, 35°F-1,65m3, 40°F-1,44m3, 45°F-1,29m3, 50°F-1,16m3, 60°F-0,96m3.
– Max. flow: 0,54m3/h
– Dimensions Luxury I – Base (mm): 605×350 * Height (mm): 670
15lt. resin (for 3/4 people)
– Exchange capacity: 72,30ºHFxm3.
– Salt consumption for regeneration: 1,65 Kg./salt.
– Water consumption for regeneration: 90,7lt.
– Quantity of treated water for regeneration, 30°F-2,41m3, 35°F-2,06m3, 40°F-1,80m3, 45°F-1,60m3, 50°F-1,45m3, 60°F-1,20m3.
– Max. flow: 0,67m3/h
– Dimensions Europe II – Base (mm): 480×320 * Height (mm): 1.120
20lt. resin (for 4/6 people)
– Exchange capacity: 96,40ºHFxm3.
– Salt consumption for regeneration: 2,2 Kg./salt.
– Water consumption for regeneration: 124,1lt.
– Quantity of treated water for regeneration, 30°F-3,21m3, 35°F-2,75m3, 40°F-2,41m3, 45°F-2,14m3, 50°F-1,93m3, 60°F-1,60m3.
– Max. flow: 0,9m3/h
– Dimensions Europe II – Base (mm): 480×320 * Height (mm): 1.120
25lt. resin (for 6/8 people)
– Exchange capacity: 120,50ºHFxm3.
– Salt consumption for regeneration: 2,75 Kg./salt.
– Water consumption for regeneration: 150lt.
– Quantity of treated water for regeneration, 30°F-4,01m3, 35°F-3,44m3, 40°F-3,01m3, 45°F-2,67m3, 50°F-2,41m3, 60°F-2,00m3.
– Max. flow: 1,12m3/h
– Dimensions Europe II – Base (mm): 480×320 * Height (mm): 1.120
30lt. resin (for 6/8/10 people)
– Exchange capacity: 144,60ºHFxm3.
– Salt consumption for regeneration: 3,30 Kg./salt.
– Water consumption for regeneration: 179,7lt.
– Quantity of treated water for regeneration, 30°F-4,82m3, 35°F-4,13m3, 40°F-3,61m3, 45°F-3,21m3, 50°F-2,89m3, 60°F-2,41m3.
– Max. flow: 1,35m3/h
– Dimensions Luxury II – Base (mm): 605×350 * Height (mm): 1.120
Included with the water softener
– Titrant kit for water treatment test
– 3-pieces standard housing 10″ clear IN-OUT 1″
– 1 Green filter wound polypropylene cartridge 9-3/4” – 50 micron
