The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed – Is a delayed regenerations according to selected frequence, Meter immediate – Regenerations are started after treating the programmed volume of water, Meter delayed regenerations – Regenerations are started after treating the programmed volume of water at the programmed hour, Mixed time/volume regeneration – Similar to delayed regeneration, but it allows to program a maximum period of time without regenerations. After this time the system will start a delayed regeneration. The necessary operations for garantuee the correct functioning of the softener are to keeping power on all the time and remaining enough salt in brine tank. The only requirements for installation are three water pipe ports (inlet, outlet, drain) and power supply. Bypass and mixing valve to adjust the outlet hardness included in the system. CE, NSF, D.M. 25, D.M. 174 Certified.
Features
* Pressure min.: 1,4 bar(1,4 kg/cm2)
* Pressure Max.: 8,6 bar(8,6 kg/cm2)
* Temperature Min: 4°C
* Temperature Max: 43°C
Water hardness (limestone)
In °F (French degrees), can be measured with the drops of Titrant, important to determine the choice of the type of water softener and optimize the consumption of salt.
Adjustment of outlet hardness
It’s recommended to not leak totally softened water in a residential installation. CS Water softeners have a residual hardness integrated regulator that allows you to precisely adjust the hardness of the treated water. To adjust the residual hardness must then carefully open the regulator MIX valve. All softeners are supplied with the valve fully closed and then will deliver water at 0°F. Water intended for human consumption, we recommend a residual hardness between 5 and 10ºF for copper pipes and between 8 and 10 º F for iron pipes. Depending on the hardness out planned, the water softener will tend to produce more water and less sweetened salt intake because the input hardness must be compensated with the output value.
Benefits and advantages
Reduction of water hardness, which is cause of scale. ENERGY SAVING: the device prevents the formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft and clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps, fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding salt in the water softner.
Technical data (ideal for 6/7/8 people)
* Exchange capacity: 140ºHFxm3
* Regeneration salt consumption: 2,5 kg/salt.
* Water consumption for regeneration:180 lt.
* Number treated water for regeneration, 35°F-4,000m3, 40°F-3,500m3, 45°F-3,111m3, 50°F-2,800m3, 60°F-2,333m3.
* Working flow: 0,8 m3/h
* Working flow MAX: 1,2 m3/h
* Inlet/Outlet water: 1″
* Dimensions mm (WxDxH): 300x512x1110
