+39 0763 63 01 32
How to make a connection
Cut the tube square.
Cut the tube square and remove burrs and sharp edges. Ensure the outside diameter is free of score marks. For soft or thin walled tube we recommend the use of a tube insert.
Push up to tube stop
Push the tube into the fitting, to the tube stop.
Pull to check secure
Pull on the tube to check it is secure. Test the system before use.
To disconnect
To disconnect, ensure the system is depressurised, push the collet square against the fitting. With the collet held in this position the tube can be removed.
pieces available:
– female adaptor (BSP thread) 1/8″ – quick fit 4mm – PM450411E*
– female adaptor (BSP thread) 1/8″ – quick fit 6mm – PM450611E
– female adaptor (BSP thread) 1/4″ – quick fit 6mm – PM450612E*
– female adaptor (BSP thread) 1/4″- quick fit 8mm – PM450812E
– female adaptor (BSP thread) 3/8″- quick fit 8mm – PM450813E
– female adaptor (BSP thread) 5/8″- quick fit 10mm – PM451015FE*
– female adaptor (BSP thread) 5/8″- quick fit 12mm – PM451215FE
*With thread seal. Other size no seal.
