Innovative Pentair reverse osmosis system ideal for large continuous flow water requirements.
The system does not require storage tanks or electricity. For proper operation, the water pressure at least 2.76 bar of operation is sufficient.
PRF-RO is characterized by a constant efficiency membrane and high recovery. It also has a high-impact plastic structure and a compact and elegant aesthetic.
Ideal system for:
– Steam generators
– Coffee machines
– Photographic workshops
– Water coolers
– Offices
– Restaurants
– Humidifiers
– Aquariums
– Nebulisers
– Pub
General characteristics:
– Flow rate (l/min): 1,5
– Rejection (%): 92
Dimensions of pipes/fittings:
– Inlet piping: 1.22 m natural coloured 12.7 mm (4 ft ½ inch)
– Concentric tubing: 1.22 m black tube 9.53 mm (4 ft % inch)
– Permeated tubing: 1.22 m blue tube of 9.53 mm (4 ft % inch)
– Discharge pipe (for installation with air gap): 0.91 m of 12.7 mm red pipe (3 ft ½ inch)
– Exhaust pipe connection: 9.53 mm or 12.7 mm (flat or ½ inch)
– Activated carbon post-filter: 9.53 mm quick disconnect couplings (inch)
– Inlet connections: 12.7 mm x 12.7 mm x 12.7 mm T (1/2″ x 1/2″ x 1/2″)
Filters and membranes:
– 1 Activated carbon pre-filter 43.2 cm (17.0″) x 7.4 cm (2.9″)
– 2 RO membranes 350GPD 47.6 cm (18.75″) x 8.0 cm (3.16″)
– 1 Activated carbon post-filter 25,4 cm (10,0″) x 5,1 cm (2,0″)
Brought
– Activated carbon pre-filter: 14,2 LPM (3,75 GPM)
– Membrane: 0,95 LPM (0,25 GPM)
– Activated carbon post-filter: 2,8 LPM (0,75 GPM)
Average duration
– Activated carbon pre-filter: 6-12 months, 37,850 litres (10,000 gal)
– Membranes: 2-4 years
– Activated carbon post-filter: 6-12 months
Conditions of use
Included in the system:
– Installation kit
– Tap 1 via chrome
