High efficiency, disposable encapsulated membrane Green filter TFC:
-
50 GPD
-
75 GPD
-
75 GPD Filmtec
-
100 GPD
Change complete of vessel and membrane for maximum hygiene!
Features
Type of membrane: spiral wound
Membrane consists of 3 layers:
1. Cross linked fully aromatic polyamide 0,3 micron.
2. Polysulfone 45 micron.
3. Non woven fabric polyester 100 micron.
Specifications of product
50 GPD
– Active surface: 0,37m²
– pressure 4,5bar(65psi)
– production flow (N1) 9,45l/h
– salts rejection (N2) 97%
– recovery 15%
75 GPD
– Active surface: 0,37m²
– pressure 4,5bar(65psi)
– production flow (N1) 11,81l/h
– salts rejection (N2) 97%
– recovery 15%
75 GPD Filmtec
– Active surface: 0,37m²
– pressure 4,5bar(65psi)
– production flow (N1) 11,81l/h
– salts rejection (N2) 97%
– recovery 15%
100 GPD
– Active surface: 0,46m²
– pressure 4,5bar(65psi)
– production flow (N1) 15,75l/h
– salts rejection (N2) 97,5%
– recovery 15%
Connections
– Inlet water: o.d. stem 3/8″
– outlet permeate: o.d. stem 1/4″
– drain: o.d. stem 1/4″
(N1) Permeated flow and salt rejection based on the following test conditions: 500 ppm NaCl 25 °c. Permated flow for individual elements may vary +/- 15%. Minimum salt rejection is 95%
Operating limits of 50, 75, 100 GPD
– Max. temperature 45 ºC (113ºF)
– max. pressure 21bar(300 psi)
– max. P. for element 1 bar(15 psi)
– max feed flow rate 7,6lpm (2.0 gpm)
– pH range, continuous operation 3-10
– pH range, short-term cleaning (30 min) 2-11
– free chlorine tollerance <0,1 ppm
Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure.
We recommend removing residual free chlorine by pre-treatment prior to membrane exposure.
We recommend replacing it every 24 months max.
