800 GPD membrane with bayonet connection for Edenya RO Tech reverse osmosis systems.
Thanks to its production capacity it is able to supply 2 liters of water with only 1 liter of waste, optimizing consumption.
The bayonet connection with which the membrane is equipped allows rapid replacement in a very short time without the help of a technician. Simply unscrew the handle and pull out the membrane to change it. There is no need to disconnect pipes and fittings, thus avoiding the risk of water leaks.
Technical characteristics of the membrane:
- Membrane capacity: 800 GPD
- Connection: bayonet
- Filtration: 0.0001 micron
- Usage: Removal of heavy metals, microorganisms, bacteria, pesticides and antibiotics
- Reduction capacity: > 90%
- Autonomy: 20000 litres
- Membrane change: every 36 months
Membrane replacement
- Turn off the power and turn off the water supply before replacing the membrane.
- Remove the front cover.
- Turn the membrane to be replaced counterclockwise and remove it.
- Remove the packaging of the new membrane and insert the filter cartridge into the padlock icon on the system.
- Turn on the water supply and reconnect the power. If replacing the RO membrane, activate the RO filtered water lever on the faucet, so that the water flows for 30 minutes.
- Reset the filter life: Reset button: To reset the membrane life indication, press and hold the Reset button for 5 seconds. The machine will emit a beep and the RO membrane life indicator will flash blue. Briefly press the Reset button and select the filter to reset. When the selected membrane light starts flashing, press and hold the Reset button for 3 seconds.
- The machine will emit a beep and the light will emit a steady blue light. It means that the reset of the useful life of the membrane was successful.
