Set composed by 2 filters:
-1 In-line T33 sediment filter 1/4′ ‘ FPT 2,5” ‘x11’ – 5 micron
-1 ICL12-GAC-S silver granular activated carbon in line filter (GAC) 1/4″ FPT 2,5″x11″
In line sediment filter features
– Service life: 6 months (max. 1 Year)
– Filtration: 5 micron
– Flow rate: 0,75 gpm (2,8 L/min)
– Pressure: 8 bar (125psi)
– Temperature Rating: 35 – 100°F (2 – 38°C)
– Filter dimensions DxH (mm.): 62,2×280(mm.) – 2,5”x11″(In.)
– Installation horizontal or vertical
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene sediment filters are highly effective for filtering and removing solid particles that flow through our water. They do not remove chemicals or contaminants.
GAC silver filter features
– Chlorine reduction
– Technology: granular activated silver carbon (GAC)
– Service life: 2.500 gallons (9.500L) max. 1 year
– Maximum flow: 0,75 gpm – 2,8 lt/min.
– Maximum pressure: 125 psi – 8 bar
– Maximum temperature: 100°F – 38°C.
– Minimum temperature: 35°F – 2°C
– Maximum temperature: 100°F – 38°C.
– Minimum temperature: 35°F – 2°C
– Filter dimensions DxH (mm.): 62,2×280(mm.) – 2,5”x11″(In.)
– Installation horizontal or vertical
This silver carbon filter reduces taste, odor and it prevents bacterial growth in the filter
Attention
– Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 3 minutes to allow air purging and flushing of cartridge.
-Change cartridges: when capacity is reached, or when flow comes too slow (precipitates under 0,7bar/10psi), every 6 months or 1 a year.
– Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. All systems must be maintained according to producer instructions.
