Set composed by 2 filters:
-1 Ionicore IC-11SE sediment in line filter 1/4″ FPT 2,5″x11″ – 5 micron
-1 Ionicore IC-11SCGAC silver coconut granular activated carbon in line filter 1/4″ NPT 2,5″x11″
In line sediment filter features
– Service life: 6 months (max. 1 Year)
– Filtration: 5 micron
– Flow rate: 0,75 gpm (2,85L/min)
– Pressure: 8,6bar (125psi)
– Temperature Rating: 35 – 100°F (2 – 38°C)
– Filter dimensions DxH (mm.): 62,2×280(mm.) – 2,5”x11″(In.)
– Installation horizontal or vertical
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene sediment filters are highly effective for filtering and removing solid particles that flow through our water. They do not remove chemicals or contaminants.
Silver GAC coconut filter
– Chlorine reduction
– Technology: Silver coconut granular activated carbon (GAC)
– Service life: 2.500 gallons (9.460L) max. 1 year
– Flow rate: 0,75 gpm (2,85L/min)
– Filter dimensions DxH (mm.): 62,2×280(mm.) – 2,5”x11″(In.)
– Installation horizontal or vertical
Filter made of granular activated carbon deriving from coconut shell for an high level of absorption with high efficiency. The filter reduces odor, color, taste, chlorine, dirt, rust, suspended material, mold and algae.
Warning:
– Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 3 minutes to allow air purging and flushing of cartridge.
-Change cartridges: when capacity is reached, or when flow comes too slow (precipitates under 0,7bar/10psi), every 6 months or 1 a year.
– Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. All systems must be maintained according to producer instructions.
