Chlorine tester for water. It can be used to measure the amount of chlorine in swimming pools. The system is simple to use.
How to use it:
– Rinse the test pieces with the water to be analysed.
– Place 5 ml of water for analysis in both test tubes and insert one (blank test) into the comparator.
– Place the comparator on the colour scale so that the coloured fields are under the blank test.
– Add 6 drops of total chlorine reagent to the second test tube and shake.
– After about 5 minutes, place the test piece in the empty hole of the comparator.
– Compare the colours from above until you find the corresponding colour and read the relevant chlorine concentration.
Features:
TYPE OF ANALYSIS: colorimetric, designed for chlorinated water with few organic substances (for example drinking water)
METHOD: o-tolidine
SENSITIVITY: 0.1 ppm Cl2
RANGE: 0.10-0.25-0.50-0.75-1.0-1.5 ppm Cl2
NUMBER OF DETERMINATIONS: 75-100
Content of the kit:
– 1 bottle 25cc reagent Total chlorine
– 2 10cc tubes with 1 cap
– 1 comparator
– 1 colour scale 0.10-2 ppm cl
– instructions.
