+39 0763 63 01 32
Aquais 90 of Zerica
It is one of the most compact domestic refrigerators in the world to allow easy positioning in any kitchen.
Aquais 90 dispenses water:
– natural at room temperature
– natural cold
– cold sparkling wine (selectable level of carbonation)
This over-the-counter chiller, completely made in Italy, has many qualities:
– produces up to 3 continuous pitchers of water.
– Both the cooling circuit and the gas supply are extremely quiet.
– It has a new cooling chamber in stainless steel with silver particles with hygienic and bactericidal properties.
– It is equipped with a professional gasifier for the precise regulation of the quantity of gas injected.
– Components made in Italy that reliability and durability.
Characteristics
Power supply: 220-230V / 50hz – European Schuko plug
Supply: cold water + temp. ambient + sparkling cold
Compressor: 1/15 hp
Cooling capacity: 16 Lt/h
Cooling System: Silver Turbo Clean Ice Bank*
Temperature regulation: M = Mechanical
Connection to the water supply: YES
Cooling GAS and water pipes: antibacterial
Power consumption: 170 W.
*Silver Turbo Clean is an exclusive Zerica that greatly improves heat exchange and hygiene in cooling products with thermowell. The liquid introduced through nozzles creates a vortex along the walls of the cooling chamber increasing efficiency and avoiding stagnation. Silver particles in contact with water oxidize releasing ions that perform a documented bactericidal action.
The Aquais 90 chiller is supplied without CO2 cylinder and filter. Ideal for those who already have a filtration system. 2 years of warranty!
Positioning
It is essential to identify a clean, aerated and away from heat sources.
Leave a space of at least 5 cm per side and at least 25 cm near the ventilation slots in order to preserve the refrigerator unit from any damage or malfunction.
Failure to comply with the above indications causes the compressor to overheat and rupture with the immediate forfeiture of the warranty.
Filter installation
We recommend the use of the product together with a system for the treatment of drinking water.
For systems equipped with a cylinder head, insert the filter unit.
For systems with external mounting, provide for the installation of the filtration system upstream of the product.
Note the activation date and replace the filter elements within the deadlines set by the manufacturer or in the event of a significant reduction in water flow.
Dispose of according to current regulations relating to environmental protection.
CO2 installation
(only prepared models)
products that dispense sparkling water require connection to a CO2 cylinder, with pressure reducer (output between 0 MPa and 0.5 MPa).
Only use cylinders with a regular test certificate and filled exclusively with food grade carbon dioxide (E290).
Dispose of disposable containers according to current regulations on the environment.
Ensure the CO2 cylinder to prevent sudden falls and consequent damage to the gearbox.
Water network connection
Complete the water circuit with taps and accessories
It is advisable to insert a valve upstream of the entire system for future needs and to equip it with flood protection (recommended choice).
Install the overpressure kit if supplied.
The plant must be connected to the drinking water supply.
The inlet pressure shall be between 0,250 MPa and 0,500 MPa with a flow > 3 V/m.
Connect the drain pipe (where provided).
Check the tightness of the water system before proceeding to the electrical connection.
Grid connection
Check the voltage and frequency compatibility with the target network.
For products with IEC socket use only the one provided by your country.
If the power cord is damaged replace it with an equivalent one available at a Zerica service center.
Failure to comply with the above can cause harm to people and property.
Measures
