The fleet water cooler delivers high quality drinking water at the touch of a button. This is a robust, reliable mains fed water cooler which will fit well into any environment. With a choice of water options including: Ambient and Chilled, Chilled and Hot, Cold Hot and Carbonated.
As the growth of the mains-fed water cooler market continues, customers are increasingly citing concerns about sanitisation and contamination with mains fed Water coolers. With the Fleet now available, you can put your customers minds at rest. The fleet filtration system reduces the chance of microbiological contamination by 98% and is one of the safest mains fed cooler available on the market.
Sanitisation also takes a matter of seconds with the fleet cooler, which means you can sanitise 40% more coolers per day without the need for chemicals, complex training or equipment.
Model Combinations
High Dispense Point
Customers have easier access to water with our High Level Dispense Point – no stooping or bending is required to dispense water.
Duplex Dispense Nozzle
Prevents contamination – customers fingers and hands can never come into direct contact with the point of water dispense.
Drip Tray
Drips from the dispense nozzle are collected in the removable drip tray, when the drip tray is full a red float display will appear to indicate to the customer to empty it. Also the fleet drip tray has been designed with permanent drain facility in mind so you can permanently drain the drip tray if required. Large Dispense space to accommodate for sport bottles and jugs to fit under with ease.
Direct Dispense Cartridge System
Offering a quick sanitation method that not only reduces contamination but gives an easy maintenance process.
The system mounts an activated carbon cartridge from 0.5 microns. Removes odor, color, taste, turbidity, reduces bacteria protozoa such as cryptosporidium and giardia lamblia cysts. Prevents the formation of bacterial biofilm. The filter also reduces asbestos, lead, mercury, Dichlorobenzine & Toxaphene.
Capacity: 5,000 liters or 6 months * Flow: 2lt./min. * Working Pressure: 2-4bar * Operating temperature: 2-38°C * Connections: John Guest OD stem 8mm.
Ability to use Generic filters
Ebac understand that you may want to carry on using your own filters so the fleet cooler allows you to do this if preferred.
Built in Water Pressure Regulator
Taking the hassle out of installations, and knowing that the water pressure inside the cooler is at its optimum.
Direct Dispense
By incorporating Direct Dispense into the Fleet Cooler, the water is filtered at the time of dispense. This means that the water does not come into contact with air until dispense which keeps it cleaner and less prone to contamination.
Direct Chill
Direct chill is an effective way to chill water quickly on demand. Its main advantage over other cooling methods is that the water flows constantly through the system, rather than sitting in a reservoir waiting to be dispensed. Coupling this technology with Ebac’s unique Direct Dispense system means that the vulnerability attached to filtering water prior to entering the coils of a standard direct chill unit is now eliminated!!! A huge leap forward for the mains fed water cooler market as Ebac offer water that is only filtered on the point of dispense but also chilled on demand.
Ice Bank
Ice bank technology is a form of thermal energy storage and when it is used in coolers it is considered to be one of the most effective ways to reduce the temperature of the water inlet. Within the Fleet cooler the drinking water will pass through thin coils, outside of the coils is a reservoir where cold water is placed, this cold water will form Ice to enable the drinking water inside of the coils to reduce in temperature making it now possible for you to offer a permanent supply of chilled and filtered water to your customer.
Connections
Inlet water: Quick fit 8 mm.
