Chlorine maker with Titanium electrode, o-ring, Starfit fittings 3/8″

Chlo Active CL2 complete chlorine maker with titanium electrode, o-ring, starfit fittings 3/8″.

This chlorine maker is import for automatic sanitizing of softener resins. It is compatible with the cabinet water softeners like Parkin, Autotrol Penaut and with single tank water softeners with Clack and Fleck valve. 

Operation:

Connect the probe on your softener brine line (use the necessary adapters). Check how many liters of resin are there in your softener (look on softener manual). Make sure that the plug of our generator is disconnected. On the generator’s board there is a trimmer that can be setted from 1 to 70 minutes of timer. Every minutes that you program can disinfect 1 lt of resin. The system is ready to start.

How it works:

The softener during regeneration aspires the brine, our system feels the passage of brine and active electrolysis of NaCl for the time setted on the probe. After this time the generator is silent for 4 hours (ignoring the possible passage of brine). After this 4 hours the system is ready to re-disinfect the resins. The green led indicates the system voltage, the yellow led indicates system disinfection.