+39 0763 63 01 32
Filters manufactured with 100% pure polypropylene wire. They reduce sediments, rust and others suspended impurities. The filter is wound around an internal rigid polypropylene core with a precise model, this guarantees an higher filtering surface. The result is an high sediments hold back capacity and an higher efficency then normal wound polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene construction provides superior chemical resistance. Ideal for a wide variety of food and beverage or industrial filtrations.
Application:
– Food and beverage.
– Bottled water production.
– Household water dispenser, water purification systems.
– Commercial water purification systems, drinking water systems.
Technical data
- Service life: When completely dirt – 3, Max. 6 months
- Flow rate: 6 gpm (23L/min)
- Pressure: 87psi (6bar) max.
- Max differential pressure:80 kpa (0,8 bar)
- Temperature Rating:39,2 – 176°F (4 – 80°C)
- Efficiency:80%
- Dimensions H.xO.D.:10″ x 4-1/2″ (Inch) / 254 x 114 (mm.)
- I.D. Core:1,102″ (Inch) / 28 (mm.)
- Core: Rigid polypropylene
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system.
Nota bene: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
