The Everpure IN10 inline filter reduces odor, color, and taste, making it ideal for vending machines and ice makers.
It is designed to be installed inside equipment used in catering, post-mix systems,
coffee machines, vending machines, and chilled water dispensers.
What is it for:
– Improves the taste of beverages.
– Protects against clogs, corrosion, and wear.
– Requires no electricity.
– Can be installed both horizontally or vertically.
– The quick-change cartridge is easy to install and replace without the need for special tools.
The Hydroblend polyphosphate-based limescale inhibitor prevents limestone from forming inside the water circuit and
the pumps. It reduces maintenance costs and downtime by keeping the equipment running at full capacity.
In-line cartridges do not require heads or bayonet fittings for installation and can be positioned in
any orientation (horizontal or vertical).
The quick-change cartridge is easy to install and replace without the use of special tools.
Specifications:
– Chlorine reduction
– Limescale reduction
• Technology: Granular activated carbon (GAC)
• Filter density: None
• Capacity: 9,085 liters (2,400 gallons)
• Flow rate: 2.8 L/min (0.75 gpm)
• Temperature: 35–100°F (2–38°C)
• Pressure: 10–125 psi (0.7–8.6 bar), non-shock.
• Dimensions: 2“ x 10.5”
• Connections: 1/4″ Female
• Cartridge Dimensions HxD (mm): IN-10 50.8×266 (mm) – 2”x10.5” (in.)
• Activation: It is recommended to run water through the filter at maximum pressure and flow rate
for at least 5 minutes to allow air in the cartridge to be purged.
• Cartridge replacement: every 6 months.
Do not use where the water is microbiologically hazardous or of unknown quality without adequate disinfection upstream and downstream of the
system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts.
All systems must be maintained according to the manufacturer’s instructions.
