This box set include 3 reverse osmosis filters:
– 1 melt blown polypropylene cartridge 9-3/4″-5 micron
– 1 granular activated carbon cartridge (GAC) 9-3/4″
– 1 carbon block cartridge 2,5″ x 9-3/4″ – 10 micron
Features of melt blown polypropylene cartridge 9-3/4″-5 micron
Features of granular activated carbon cartridge (GAC) 9-3/4″
Features of carbon block cartridge 2,5″ x 9-3/4″ – 10 micron
The replacement of the cartridges is really simple.
Below the instructions stated on the packaging:
-disconnect the machine from the power grid if it has the pump
– close the shut-off valve of the water and inlet valve of the tank
– open the water filter tap to reduce the pressure in the machine
– wait a minute and when the pressure has decreased put under the machine a vessel to avoid a water leak on the floor
– unscrew to the left the vessels
– remove the filter and clean inside the vessel
– put inside the vessel the new filters
– be careful that the rubber gasket of GAC filter is on the top
– take the vessel, push them up and turning right
